W indows 10 now runs on more than million PCs across the globe. The number is quite massive but still, the popular operating system runs into problems and bugs quite often. No to mention, how Microsoft was roasted for implementing cheap telemetry practices into its OS.
Of course, the list goes on.
Ever since Windows 10 arrived as a free upgrade, some users have also experienced the Windows 10 brightness control not working issue on their machines. So, for instance, the battery is running low and you find the brightness control not working. How bad is that? But surely, there is a solution available. Now your PC will install the selected driver and your Windows 10 brightness control issue will be solved.
You can check it by increasing and decreasing the brightness of your PC. Did you find this solution for Windows 10 brightness control issue helpful? Tell us in the comments below. If you want more stuff related to Windows 10, feel free to read the dedicated Windows 10 Guide. Sign in. Forgot your password? Get help. Password recovery. Tails 4. Microsoft Corp.
Enable Netflix Parental Control. All Rights Reserved.Is nothing showing up on your monitor? Fortunately, testing a monitor is one of the easier computer troubleshooting steps. By fully testing your monitor using a logical troubleshooting process, you can be confident that your monitor is or is not working properly and then take whatever action necessary to get back up and running.
Testing a monitor could take from a few minutes to much longer depending on the cause of the problem. Check to make sure your monitor is on! Some monitors have more than one power button or switch —confirm that they're all switched on.
Check for disconnected monitor power cable connections. Your monitor might be working fine and your only problem may be a loose or unplugged monitor power cable. A disconnected monitor power cable could be the cause of your problem if your monitor's power light is completely off. Check for disconnected monitor data cable connections. Again, your monitor might be turning on without a problem but no information can get to it because the cable that connects your monitor to your computer is disconnected or loose.
A disconnected monitor data cable could be the cause of your problem if your monitor's power light is on but is amber or yellow instead of green. Turn the monitor's brightness and contrast settings completely up. Your monitor might be showing information but you just can't see it because these display settings are too dark.
Most modern monitors have a single on-screen interface for all settings, including brightness and contrast. If it turns out that your monitor isn't working at all then you'll likely not have access to this interface. An older monitor might have manual knobs for adjusting these settings.
Make sure all monitors are set up properly if this is a dual-monitor setup. This step might seem too general, but if you're using two or more monitors, it's possible that the extended displays work just fine but the operating system isn't using them properly. For example, maybe a projector is connected to the laptop but not set up as an additional screen so it remains blackor maybe the projector is configured as the primary display, and so the on-board screen is black.
Test that your computer is working correctly by connecting to your PC a different monitor that you're certain is working properly.Unfortunately, all monitors and flat-panel displays are different. There is no universal button system or set of instructions we could give you to configure your monitor using the buttons on the front. By far, the best method of determining what each of the buttons do would be to consult your monitor owner's manual.
If you have misplaced your monitor documentation, it can often be found by searching the Internet for the model name or number of the monitor. For general reference, we created the following chart to help illustrate what many of the buttons and icons associated with them do. Below is general information on the likely monitor controls on your monitor. Using these controls, you can help improve the quality and layout of the picture on your monitor for better viewing. Keep in mind that not all monitors have all of the following buttons.
Furthermore, with many monitors, you need to press a button to access a menu before seeing any of the following options. The names of the monitor icons can differ between brands and types of monitors.
How to Test a Computer Monitor That Isn't Working
If you don't see the exact same icon names, look for icons with names similar to those shown in the chart below. If the monitor has no more than two buttons on the front of it, is likely configured through software and not with physical buttons.
If there are no buttons on the front of the monitor, check on the bottom and top edge. If no buttons are found, the monitor may utilize touch-sensitive buttons instead of push buttons. Touch-sensitive buttons are often found on the front, bottom edge. Power - Turns the monitor on or off. Brightness - Using this button or wheel the user can increase and decrease the brightness on the screen.
Contrast - Using this button or wheel can increase and decrease the amount of contrast on the screen. Horizontal Size - Allows for the picture on the screen to be stretched to the horizontal edge of the monitor. Vertical Size - Allows the picture on the screen to be stretched to the vertical edges of the monitor. Horizontal Position - Allows the picture to move moved horizontally. Once in the center, use the Horizontal Size to stretch it to have an equal amount of black border on each side.No monitor is perfect.
Somewhere along the line you will end up troubleshooting something, but frequently it just takes a little adjustment.How to FIX Auto adjust in process 2019
The typical monitor has five buttons: one Power button and then four buttons to manipulate the onscreen menu. Usually, two buttons have arrows or triangles on them, and two other buttons manipulate the menu commands.
The types and designs of the buttons differ from monitor to monitor. Generally speaking, pressing one of the buttons or the button labeled with a Menu icon displays the onscreen menu. You then use the arrow or triangle buttons to select a menu item. The other two buttons are used somehow to manipulate the item and adjust the monitor.
The onscreen menu eventually disappears after a period of inactivity. Or, sometimes it disappears when you press the Main Menu button while viewing the main menu. One key feature found in many onscreen monitor menus is Auto Tune or Auto Adjust. Use this feature to quickly have the monitor adjust to the image the display adapter is sending. If the monitor sports an Auto-Adjust feature on its menu, try it.
Some monitors feature a Save option on their menus. Use this option to save your favorite settings. A corresponding Recall option restores the settings you saved. Adjust the Monitor on Your PC.Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.
And if you have multiple monitors with different pixel densities, things can get even more confusing. Thankfully, Windows 10 has settings that can help.
Say your laptop is super high-resolution, and requires scaling to keep icons and text from looking tiny. You want text and other elements to look the same size on both screens, even though they have very different pixel densities.
Remember, whatever scaling settings are, your actual resolution should always be set to the default of your display. Note how the text is now large enough to hide the left menu column. Now the on-screen elements appear to be around the same physical size on both my screens. Despite have an identical horizontal resolution, images, text, and icons will be physically larger on the laptop so they can roughly match the same elements on the desktop screen.
You may need to log out and log back in to apply the settings across all of Windows. If you frequently use multiple monitors with different pixel densities, ignore this option.
Online Support Center
A common way to achieve this is holding the Ctrl button and scrolling up or down with your mouse—this works in Microsoft Edge, Chrome, Firefox, Word and most other word processors, and even Windows Explorer. Ctrl-0 will return the zoom to its default level. Check the View menu in most programs to see if it offers scaling options. The Best Tech Newsletter Anywhere.
Joinsubscribers and get a daily digest of news, comics, trivia, reviews, and more. Windows Mac iPhone Android. Smarthome Office Security Linux. The Best Tech Newsletter Anywhere Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.
Skip to content. How-To Geek is where you turn when you want experts to explain technology. Since we launched inour articles have been read more than 1 billion times. Want to know more?I've browsed the forums for troubleshooting on this matter, but I haven't found anyone with the exact same problem as me.
I'm having trouble with my Dell UH monitor - it's just pure black. Still the same problem. The weird thing is though, that my other moniter connected to my computer Philips television works perfectly fine, except for one small detail.
I've used the TV to play a game that I play daily, and it has always displayed the game inbut as of when my monitor stopped working, the TV is now showing the same game in This leads me to believe that there might be a problem with my graphic card, but I don't know what kind of problem that would be.
The power calbe is also working fine. I did notice though that whenever I unplug or plug in cables, or change any screen resolution settings, my Dell monitor suddenly comes alive again, but only for a second or two, while showing the message "Auto adjustment in progress" and then turning black again.
While browsing the forums I found a few people with the same problem, but they all seem to run Windows XP as they are talking about pressing the "turn computer off"-button and then pressing some button on the screen.
Their problem also seems to be that the "auto adjustment in progress" flashes on their screen, and it works fine except for that. Go to Solution. It's not a problem with the source of the video signal desktop computer, HDTV, etc. If you had another monitor, you could verify this. The problem is with your monitor. There are two parts that are needed to produce the light that comes through the screen, the cathode tube, which is sort of like a fluorescent lightbulb, and the inverter board, which supplies electrical power to the lightbulb.
You might look around for a local shop that diagnoses and repairs monitors. Usually the necessary parts are pretty cheap. View solution in original post. I realise this is a quite late answer, but I didn't see it until now. The self test didn't help. However, I was unable to perform some of the actions listed, because my screen is black at almost all times.
Is there anything else I can do?
I also forgot to add that after re-installing NET Framework 4. It was up and running for a full two-three minutes before shutting down again I'm not sure I'm following. I don't know what an inverter board is, and if it was a problem with a backlight, shouldn't it be blank at all times?
I'm not sure I know what you mean by desktop either I'm not really into computer terms.Keep in touch and stay productive with Teams and Officeeven when you're working remotely. Learn how to collaborate with Office Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number.
Did this solve your problem? Yes No. Sorry this didn't help. One last thing. One of the first things I did when I bought my Surface Pro was to install the latest chipset drivers from Intel. Maybe try installing the chipset? You can get it here where I am hosting the drivers for the Surface Pro:. April 14, Keep in touch and stay productive with Teams and Officeeven when you're working remotely. Site Feedback. Tell us about your experience with our site.
Just got my 64gb surface pro, everything is fine except the brightness controls are not working. I turned of auto brightness and the brightness options in the power saving or on the charm bar still do nothing. Screen seems to be stuck at the same brightness no matter what I do.
Any suggestions? This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Previous Next. If you do a search for powercfg. If so, do this: Set it to its lowest setting from the Power Options window Shutdown Power it back on When you turn it back on, does the normal brightness control now work from the Charms menu?
Since you say you just got it, I would recommend a factory reset. A factory reset will remove all files and applications that have been installed on it. Thanks for marking this as the answer. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. How satisfied are you with this response? In reply to daov's post on February 19, None of this worked, did the set to lowest set to highest, trick and adjusting it in the powercfg does nothing.
I have already moved the recovery partition to a usb drive do I need to use that to do a factory reset? Has anyone else had this exact same issues and been able to fix it?